Top 9 Gps Module For Laptop
We spent many hours on research to finding gps module for laptop, reading product features, product specifications for this guide. For those of you who wish to the best gps module for laptop, you should not miss this article. gps module for laptop coming in a variety of types but also different price range. The following is the top 9 gps module for laptop by our suggestions
724 reviews analysed
Waterproof GPS Receiver for Laptop, USB Interface, 27 db Gain
- UBLOX 8 ENGINE: Uses u-Blox protocol specification to configure device over serial interface. Combines low power consumption and high sensitivity. Exceptional jamming immunity. 56 channels for fast acquisition and reacquisition.
- MULTI BAND RECEIVER: Receives GPS, GLONASS, QZSS and SBAS. Factory set for GPS and can be changed to GLONSASS using software. Support NMEA0183, 2.3 (compatible to 3.0). Built-in WAAS, EGNOS, MSAS
- COMPATIBLE: Windows 10, Win 8, Win 7, Win Vista, Win XP 32bit or 64bit. For Linux, please check application notes on compatibility. Free GNSS software available.
- WATERPROOF: No need to cancel your road trip if it is raining since this heavy duty waterproof navigator can be used rain or shine. IPX6 Water Resistant. Cable Length 6.5 feet (2 Meters)
- SOFTWARE: Easily connects to your laptop via USB 2.0 and works with most commercial or open source mapping software including Google Earth, Windows Maps and Open CPN.
Looking for a reliable GPS or GLONASS receiver solution?
This u-Blox chipset receiver is exactly what you need. U-Blox offers the latest in next generation GNSS technology with superior position accuracy in urban canyons. They also offer free U-Center GNSS evaluation software that can be downloaded from the u-Blox website. The U-Center software loads your device driver and includes extensive configuration and control features with real time display of your GNSS receiver.
Technical Specifications
Electrical Characteristics
GPS Chipset: U-blox 8 Engine
Frequency: GPS/QZSS L1 C/A L1
Frequency: GLONASS L1 FDMA
SBAS: WAAS, EGNOS, MSAS
Channels: 56
Sensitivity(Tracking): -162dBm @ GPS
Sensitivity(Tracking): -158dBm@GLONASS
Accuracy
Position Horizontal: Autonomous 2.5m/2m SBAS
Velocity: 0.1m/s
TIMEPULSE: 1 pulse per second, synchronized at rising edge, pulse length 100ms
Accuracy of time pulse signal: RMS 30 ns@GPS 50ns@Glonass
Accuracy of time pulse signal: 99% 60 ns@GPS 100ns@Glonass
Frequency of time pulse signal: 0.25 Hz 10 MHz (configurable)
Dynamic Conditions
Acceleration Limit: Less than 4g
Altitude Limit: 50,000 m
Velocity Limit: 500 m/s
Jerk Limit: 20 m/ second³
Heading accuracy: 0.5 degrees
Low Noise Amp
Amplifier Gain: 27 dB Typical
Filtering: -25dB (+100 MHz)
Output VSWR: 2.0 Max.
Voltage: DC 3 ~ 5.0V
Current: 15mA max @ 5VDC
Mechanical
Weight: 60 gram
Size: 45x38x15mm
Cable: RG174
Length: 2m
Connector: SMA
Mounting: Magnet base
Housing: Black
Generic USB GPS Receiver G-Mouse GPS Mouse Within GPS Module Antenna for Car Laptop PC Navigation Support Google Earth and MS Trips App
- Support: Google Earth map and Microsoft streets & Trips map.
- Support: Win 10/ Win 8/ Win 7/ Win XP/ Win 98/ Win Vista etc.
- Support switching Baud Rate 1200/2400/4800/9600/19200 etc by u-center.
- Built-in High Performance GPS chipset(U-BLOX) and GPS Patch Antenna.
- Ultra High Tracking Sensitivity
Stemedu VK172 USB GPS Dongle Module Vk-172 GPS/GLONASS USB Navigation, Works for Stratux Windows 10 Linux Mac, for Arduino Raspberry PI Google Earth
- ▶ Stock link: https://www.amazon.com/dp/B086KXB2KS
- ▶ The default output is the product GPS protocol data. You can test the software or serial commands to modify switch PS / GLONASS protocol data
- ▶ Plugged it into linux machine, detected as ttyACM0. No additional drivers or configuration required
- ▶ You need install the driver before use it . ▲How to work on Mac: https://tinyurl.com/gps-works-on-mac ▲How to work with Windows XP, 7, 8 or 10, Raspberry pi and linux, no need driver, video link: https://www.youtube.com/watch?v=Oag9qYuhMGg
- ▶ You can find the User Manual [pdf ] / User Guide [pdf ] on this listing page – Technical Specification
Note:It can support Windows Mac and Linux system, but it can not support android system
Description:
Chip u-blox 7020 chip
Support Windows system, Linux system, Raspberry PI and EMGRAND car
Support Google Earth
C / A code, 1.023MHz stream
Receive Band: L1 [1575.42MHz]
Tracking Channels: 56
Support DGPS [WAAS, EGNOS and MSAS]
Positioning performance :
2D plane: 5m [average]
2D plane: 3.5m [average], has DGPS auxiliary
Drift: <0.02m>
Timing Accuracy: 1us
Reference coordinate system: WGS-84
Maximum altitude: 18,000 m
Maximum speed: 500m / s
Acceleration: <>
Electrical properties:
Tracking sensitivity:-162dBm
Acquisition sensitivity:-160dBm
Cold Start Time: 29s [average]
Warm start time: 28s [average]
Hot start time: 1s [average]
Recapture Time: 0.1s [average]
Operating temperature: -30 ℃ to +80 ℃
It does not support USB 3.0
NOTE: The default output is the product GPS protocol data. You can test the software or serial commands to modify switch PS / GLONASS protocol data
U7 program, use the GLONASS switch command:
B5 62 06 3E 24 00 00 00 16 04 00 04 FF 00 00 00 00 00 01 01 03 00 00 00 00 00 05 00 03 00 00 00 00 00 06 08 FF 00 01 00 00 00 A0 D9 B5 62 06 3E 00 00 42 D2
U7 program, use the GPS switch command:
B5 62 06 3E 24 00 00 00 16 04 00 04 FF 00 01 00 00 01 01 01 03 00 00 00 00 01 05 00 03 00 00 00 00 01 06 08 FF 00 00 00 00 01 A4 25
U-center Windows Link: https://www.u-blox.com/en/product/u-center-windows
For raspberry pi, there is no need driver, you just need plug and it can work
User Guide documentation on Windows Sensor Driver can be found at https://www.u-blox.com/en/product-resources/2681
Package Includes
1X USB GPS Module
Onyehn VK-162 G-Mouse USB GPS Dongle Navigation Module/GPS USB Engine Board External GPS Antenna Remote Mount USB GPS Receiver for Raspberry Pi Support Google Earth Window Linux
- VK-162 GPS support for windows and for linux system, not for android and IOS system
- The USB GPS is a great, easy, and an awesome solution for travelers.It works anywhere around the world. After you download the maps for the country traveling, it will pin point exactly where you are without having to pay any service.
- For amateur radio operators who need accurate timing for digital communications, this is a unit that will help synchronize the timing for those modes.
- This device is extremely accurate. It usually takes a couple of seconds to acquire the initial fix, followed up shortly by acquiring additional satellites for a more precise fix.
- Note:Works with Windows XP,7,8 or 10,Windows driver: https://www.u-blox.com/en/product-resources/2673
- Raspberry pi and linux no need driver video link:https://www.youtube.com/watch?v=Oag9qYuhMGg
- UBlox software:https//www.u-blox.com/en/product/u-center-windows. The default output is the product GPS protocol data. You can test the software or serial commands to modify switch PS/GLONASS protocol data
Model: VK-162
C/A code, 1.023MHz code stream
Receiving band: L1 [1575.42MHz]
Tracking channel: 50
Support DGPS [WAAS, EGNOS and MSAS]
Positioning performance
2D plane: 5m [average]
2D plane: 3.5m [average], with DGPS assistance.
Drift: <0.02m>
Timing accuracy: 1us
Reference coordinate system: WGS-84
Maximum altitude: 18,000 meters
Maximum speed: 500m/s
Acceleration: <>
Electrical properties:
Tracking sensitivity: -160dBm
Capture sensitivity: -146dBm
Cold start time: 32s [average]
Warm start time: 32s [average]
Hot start time: 1s [average]
Recapture time: 0.1s [average]
Operating temperature: -30°C to +80°C
Line length 2m
Package Included:
1 X VK162 G-mouse
Beitian BN-220 Dual GPS Glonass Module Navigation + GPS Passive Antenna for Arduino Raspberry Pi Pixhawk F3 CC3D Betaflight F4 Flight Control Geekstory USA Shipping
- BN-220 has flash to save configuration, so you do not need to reset data next time when you use it. But it has no compass. If you need gps with flash and compass, please buy bn-880 from Geekstory.
- When you use it for Raspberry Pi, there is no driver needed but you need to install software
- The TX LED flash means gps module output normally.The PPS LED flash means gps module locate your place.
- Data Level : TTL or RS-232,Default TTL level. To make it be RS232 output, you need to use one TTL to RS232 converter cable
- If you have any issue when using our product,or you need product use documentation， please contact us directly for assistance.we will solve your problem in 24 hours.
Description:
Dimension : 22mm*20mm*6mm
Module Weight : 5.3g
Connector : 1.00mm spacing between the 4pins patch seat
Specification
Receiving Format : GPS,GLONASS,Galileo,BeiDou,QZSS and SBAS
Frequency : GPS L1,GLONASS L1,BeiDou B1,SBAS L1,Galileo E1
Channels : 72 Searching Channel
Sensitivity
Tracking : -167dBm
Reacquisition : -160dBm
Cold start : -148dBm
Hot start : -156dBm
Accuracy
Position Horizontal : 2.0 m CEP 2D RMS SBAS Enable (Typical Open Sky) Velocity : 0.1m/sec 95% (SA off) Timing : 1us synchronized to GPS time
Acquisition Time
Cold Start : 26s
Warm start : 25s
Hot start : 1s
Data and Update Rate
Support Rate : 4800bps to 921600bps,Default 9600bps
Data Level : TTL or RS-232,Default TTL level
Data Protocol : NMEA-0183 or UBX, Default NMEA-0183
Single GNSS : 1Hz-18Hz
Concurrent GNSS : 1Hz-10Hz,Default 1Hz
Operational Limits
Altitude : 50,000m Max
Velocity : 515m/s Max
Acceleration : Less than 4g
Power consumption
VCC : DC Voltage 3.0V-5.5V,Typical: 5.0V
Current : Capture 50mA/5.0V
Operating temp : -40 °C to +85°C
Storage Temp : -40°C to +105°C
Indicator:
TX LED:blue.The data output, TX LED flashing
PPS LED:red.PPS LED not bright when GPS not fixed,flashing when fixed
Wiring:
GND,TX output,RX input,VCC(3.0v-5.5v)
Package Included:
1 x BN-220 GPS Module
2 x 15cm Cable
SIM808 Module GSM GPRS GPS Development Board + IPX SMA GSM GPS Antenna Support 2G Network for Arduino Raspberry Pi Geekstory
- Document link，https://tinyurl.com/yykfnn7c ,This SIM808 module only works with 2G Network It can send SMS message. If your place is 3G Network, pls buy sim5320a Module. If you need 4G module, pls search SIM7100A in my store.
- It is used to open / close the input power supply for the module. When in use, please confirm the toggle switched to the OPEN state (near the board inside)
- SMA antenna interface: there is a GSM antenna interface, a GPS antenna interface onboard and a BT antenna interface
- USB interface: This interface is just use to update the firmware of SIM808 module
- If you have any issue when using our product,or you need product use documentation， please contact us directly for assistance.we will reply your problem in 24 hours.We try our best to provide the most professional service for each customer.
Description:
1.Three power input interface: DC044 interface and V_IN and a lithium battery interface.
Note: The range of DC044 and V_IN pin voltage input is 5-26V, when use 5V as the power, be sure that power supply can provide 2A current. The range of voltage of Lithium battery input power is 3.5-4.2V.
2. Start button: When the board is power on, the LED (PWR) will light up. After a long press (about 2 second) on this button, other three LEDs will light. And one of them starts to flash; this suggests SIM808 is beginning to work. When the power supply, GSM and GPS antenna and SIM card are connected to the module correctly, the LED will be flash slowly (3Second de 1second light), that indicates the module is registered to the network, and you can make a call or do something else.
3. TTL serial interface: a TTL level interface. Notice: The pin of VMCU is used to control high level of TTL UART, so as to realize to match between 1.25V/3.3V /5V systems. For example, if you want to use the 51 MCU to control this board, the pin of VMCU should be connected the DC5V. And if use STM32 MCU, the pin of VMCU should be connected the DC3.3V. The pins of RXD is the RXD of SIM808 and the pins of TXD is the TXD of SIM808. The pin of V_IN can connect the Power, the function of this pin is the same as DC044.
Operation:
1. Preparation:
SIM808 SHIELD
DC9V adapter
USB-TTL module or other tools.
PC software
2. Hardware configurations
2.1 Connect USB-TTL to UART interface
USB-TTL SIM808
TXD RXD
RXD TXD
GND GND
2.2 Insert valid SIM card to SIMCARD holder.
2.3 Connect the GPS antenna and GSM antenna to the board
Connect the power adapter to the DC044 Interface
2.4 Change the switch
2.6 Press the POWKEY button for 2 second, the module will work and the other 3 LEDs will light
Geekstory GT-U7 GPS Module GPS Receiver Navigation Satellite with EEPROM Compatible with 6M 51 Microcontroller STM32 UO R3+ IPEX Active GPS Antenna for Arduino Drone Raspberry Pi Flight
- In the ordinary GPS receiver module can not locate the place, such as narrow urban sky, dense jungle environment, GT-U7 can be high-precision positioning.
- GT-U7 module, with high sensitivity, low power consumption, miniaturization, its extremely high tracking sensitivity greatly expanded its positioning of the coverage.
- With a USB interface, you can directly connect it with computer. That is, with the host computer-owned serial port function, no need for external serial module. USB directly connected to the computer, That is, with the host computer-owned serial port function, no need for external serial module, send IPX interface active antenna.
- This GPS Module is great for vehicle-mounted, handheld devices such as PDAs, vehicle monitoring, mobile phones, camcorders and other mobile positioning systems sharing bike, sharing mobile power etc.
- Operating voltage: 3.6V-5V (or direct usb power supply)
- Operating baud rate: 9600 (can be modified)
Description:
With a USB interface, you can directly use the phone data cable on the computer point of view positioning effect.
USB directly connected to the computer, That is, with the host computer-owned serial port function, no need for external serial module, send IPX interface active antenna!
Features:
GT-U7 module, with high sensitivity, low power consumption.
Miniaturization, its extremely high tracking sensitivity greatly expanded its positioning of the coverage.
In the ordinary GPS receiver module can not locate the place, such as narrow urban sky, dense jungle environment, GT-U7 can be high-precision positioning.
Module with high sensitivity, small static drift, low power and lightweight volume.
With IPEX antenna interface, the default distribution of active antenna, can be quickly positioned
Operating voltage: 3.6V-5V (or direct usb power supply)
Operating baud rate: 9600 (can be modified)
Onboard E2PROM can save parameter data
NEMA output format is compatible with 6M
Size: 27.6mm * 26.6mm can be inserted or selected patch (with positioning holes)
Application:
Vehicle-mounted
Handheld devices such as PDAs
Vehicle monitoring
Mobile phones, camcorders and other mobile positioning systems
Sharing bike
Sharing mobile power
Package Includes:
1 X GT-U7 GPS Module
1 X IPX interface active antenna
Sierra Wireless Airprime Mc7355 3g 4g Lte/hspa+ Gps 100mbps Module Unlocked
Model No MC7355 Dell 1N1FY DW5808 Category 4G Module Manufacturer Sierra Wireless Chipset MDM 9615 Qualcomm Form Factor PCIe Pins 52-pin Dimensions 51 x 30 x 2.75 mm Technologies 1xRTT,LTE,HSPA+,HSDPA,EVDO Rev A,UMTS,EDGE,GPRS(Class 12),GSM Dload Speed 100 Mbps Upload Speed 50 Mbps Freq bands GPRS/EDGE 900/1800/1900/850 MHz WCDMA 1700/2100/1900/850/800 MHz LTE 1900/2100/850/700(B17)/700(B13) MHz ŁxEVDO 800/1900 MHz ŁxRTT 800/1900 MHz Temperature -25 º C to 60 º C Certifications GCF, PTCRB, CDG, NCC (Taiwan), FCC Carriers Approved Sprint, AT&T, Verizon Wireless Interfaces USB Voice Support None GPS Support Yes *For Dell Laptops ONLY*
SIM808 Module GSM GPRS GPS Development Board + IPX SMA GSM GPS Antenna Support 2G Network for Arduino Raspberry Pi
- This sim808 module is used to open / close the input power supply for the module. When in use, please confirm the toggle switched to the OPEN state (near the board inside)
- SMA antenna interface: there is a GSM antenna interface, a GPS antenna interface onboard and a BT antenna interface
- USB interface: This interface is just use to update the firmware of SIM808 module
- SIM808 gsm only works with 2G Network It can send SMS message.
- Three power input interface: DC044 interface and V_IN and a lithium battery interface.
Description:
1.Three power input interface: DC044 interface and V_IN and a lithium battery interface.
Note that: The input voltage range of DC044 and V_IN pin is 5 – 26V, when use 5V as power, be sure that power supply can provide 2A current. The input voltage range of Lithium battery is 3.5 – 4.2V.
2. Start button: When board is power on, LED (PWR) will light up. After a long press (about 2 second) on this button, other three LEDs will be light. And one of them start to flash; it means SIM808 is beginning to work. When power supply, SIM card, GSM and GPS antenna are connected to module correctly, LED be flash slowly (3Second de 1second light), it indicates module is registered to network, and you can make a call or do something else.
3. TTL serial interface: a TTL level interface. Notice that: The pin of VMCU is used to control high level of TTL UART, so as to realize to match between 1.25V/3.3V /5V systems. For example, if you want to use 51 MCU to control this board, VMCU pin should be connected DC 5V. And if use STM32 MCU, VMCU pin should be connected DC 3.3V. RXD pins is RXD of SIM808 and TXD pins is TXD of SIM808. V_IN pin can connect Power, function of this pin has the same function of DC044.
Operation:
1. Preparation:
SIM808 board
DC9V adapter
USB-TTL module or other tools.
PC software
2. Hardware configurations
2.1 Connect USB-TTL to UART interface
USB-TTL SIM808
TXD RXD
RXD TXD
GND GND
2.2 Insert valid SIM card to SIMCARD holder.
2.3 Connect GPS antenna and GSM antenna to board
Connect power adapter to DC044 Interface
2.4 Change switch
2.6 Press POWKEY button for 2 second, SIM808 module will work and other 3 LEDs will light.
Package Included:
1 X SIM808 Moudule
1 X GSM Antenna
1 X GPS Antenna
Conclusion
By our suggestions above, we hope that you can found Gps Module For Laptop for you.Please don’t forget to share your experience by comment in this post. Thank you!
Our Promise to Readers
We keep receiving tons of questions of readers who are going to buy Gps Module For Laptop, eg:
- What are Top 10 Gps Module For Laptop for 2020, for 2019, for 2018 or even 2017 (old models)?
- What is Top 10 Gps Module For Laptop to buy?
- What are Top Rated Gps Module For Laptop to buy on the market?
- or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Gps Module For Laptop?…
- All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Gps Module For Laptop.
- Before deciding to buy any Gps Module For Laptop, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
- You will know how you should choose Gps Module For Laptop and What you should consider when buying the Gps Module For Laptop and Where to Buy or Purchase the Gps Module For Laptop. Just consider our rankings above as a suggestion. The final choice is yours.
- That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
- You could see the top 10 Gps Module For Laptop of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
- You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Gps Module For Laptop.
