Best table saw fence system
Best results for table saw fence system
Delta Power Equipment Corporation 847962005250 Fence System
$211.97
$264.96
Amazon.com
Last update was on: May 12, 2024 7:33 pm
- One piece square tubular rail
- Mounting design attaches to Delta table saws including Contractor Saw, Hybrid Saw, and Unisaw models
- Three-point locking system with twin hairline pointers to assure fence is parallel to blade and accurate to within 1/64 of an inch (0.4mm)
- Easy-gliding, steel tube fence body to handle quick, precision ripping, and square cuts
- Fence securely clamps to front tube and hooks over rear rail to allow for fence attachments
Wixey WR700 Saw Fence Digital Readout
$109.99
$159.49
Amazon.com
Last update was on: May 12, 2024 7:33 pm
- Measures up to 60-inches total length
- Simple mounting brackets easily attach to almost any rectangular rail or round rail fence
- Large easy to read display reads in inches with fractions or millimeters
- Mounts on the left or right side of the fence
- Magnetic attachment allows the fence to be removed and maintain calibration
Kreg KMS8000 Precision Trak and Stops Kit
Refurbished POWERTEC BS900RF Rip Fence for POWERTEC BS900 Wood Band Saw
$29.99
$40.49
Amazon.com
Last update was on: May 12, 2024 7:33 pm
- Sturdy Extruded aluminum construction means it's solid and durable
- Provides for straight parallel cuts.
- By using the handy adjustable cam, the clamp can adjust from 11-1/8-Inch up to 11-13/16-Inch
- Simple, effective cam lever action means device is securely locked in place
- Arrives fully assembled, right out of the package
Vega PRO 50 Table Saw Fence System: 42-Inch Fence Bar, 50-Inch to Right
$439.00
$636.55
Amazon.com
Last update was on: May 12, 2024 7:33 pm
- Uses existing hole pattern for Delta Unisaw, Contractor, powermatic 66, Sears 10-inch saw
- 50-inch right 10-inch left of blade
- Fence mounting system allows full adjustment for accuracy
- Micro adjustment and aux table support
- Guide rails supported by brackets, 2-1/2-inch fence height
Kreg KMS7714 48-Inch Top Trak
Bosch 10-Inch Portable Jobsite Table Saw GTS1031 with One-Handed Carry Handle
$349.00
$453.70
Amazon.com
Last update was on: May 12, 2024 7:33 pm
- PORTABLE: Ultimate portability and mobility thanks to balanced one-handed carry handle and compact design allowing you to bring this table saw along no matter the jobsite
- TOUGH: Durable and unique all-steel base allows this portable table saw to take on the hardest jobsite abuse. The all-steel base is built to withstand heavy impact and provide long-lasting performance
- PRECISION: Square lock rip fence--self-aligning design for accurate performance and cutting consistency as you glide along the saw rails with ease. Also features Smart Guard with anti-kickback pawls and riving knife system giving you full control
Shop Fox D3575 Resaw Fence Complete Kit
43" Uni-t-fence Table SAW Fence By Peachtree Woodworking – PW1113
$89.99
$119.69
Amazon.com
Last update was on: May 12, 2024 7:33 pm
- 43" Heavy duty aluminum extrusion up-grade fence for the Delta Unifence Table Saw Guide System
- Replaces the Stock Delta Fence which mounts to their saw fence guide.
- You must own the Delta UniFence to use this product. ( NOT INCLUDED )
- Simple mounting - slide the stock fence off and slide the Uni-T-Fence on.
- No holes to drill
XACTA Commercial Rip Fence
E. Emerson Tool Co. C50 50-Inch All-In-One Contractor Straight Edge Clamping Tool Guide
$57.99
$77.13
Amazon.com
Last update was on: May 12, 2024 7:33 pm
- STRAIGHT EDGE - E. Emerson’s Contractor Series self-clamping straight edge patented design has integral tubes running the length of the wide body construction, making it ultra rigid and light to handle.
- NO C-CLAMPING - No more C-clamping! Achieve that truly straight cut using this self-clamping straight edge to guide your tools.
- EXTRA WIDE - This self clamping straight edge is extra wide for exceptional rigidity and has a low profile for obstruction free cuts.
Kreg KMS7200 Bandsaw Fence
Amazon.com
Last update was on: May 12, 2024 7:33 pm
- Precision lens cursor for pinpoint accuracy and dimensions-mounting rail is 26 inch(660mm) long, fence is 18 inch (457mm) long
- Incredibly strong and rigid for optimal durability and tighter workpieces
- Easy to attach and remove for less downtime and more productivity
- Adjustable in two dimensions for setting parallel with the blade
- Fits most 14-inch band saws for versatility
Shop Fox W1410 Fence with Standard Rails
Shop Fox W2005 Classic Fence with Standard Rails
Kreg KMS7102 Table Saw Precision Miter Gauge System
Amazon.com
Last update was on: May 12, 2024 7:33 pm
- Factory Calibration. Guaranteed out of the box to .003 accuracy of 6-inches
- Gauge head is CNC machine perfectly square to the bar and table ( no stampings)
- Vernier scale allows fast, 1/10th-degree angle adjustments. Our extremely straight 24 inch (610mm) anodized-aluminum bar is 3/8 inch(9.5mm) thick by 3/4 inch(19mm) wide and features five bar adjusters that you can use to eliminate “play” in the miter slot with the turn of a screwdriver
POWERTEC 71005 Deluxe Table Saw Miter Gauge
Rousseau 2780 Table Saw Stand for Smaller Portable Saws (REPLACES: Rousseau Models 2745 and 2700-XL)
$389.99
$549.89
Amazon.com
Last update was on: May 12, 2024 7:33 pm
- Fits Smaller Portable Saws: Dewalt DWE 7480, DW745, Bosch GTS1031, Skil SPT70WT-22, Makita 2703
- Increase rip capacity to 27”
- Includes T-Style locking fence for accuracy
- Micro Adjust Assembly for Quick & Accurate Saw Positioning
- Optional accessories include: Model 2720 Outfeed Table, Model 2780-EXT Extension Table, Model 2780-RXT Router Extension Table.Adjustable Hairline Indicator
36" Uni-t-fence Fence By Peachtree Woodworking – PW1112
$79.99
$117.59
Amazon.com
Last update was on: May 12, 2024 7:33 pm
- 36" Heavy duty aluminum extrusion up-grade fence for the Delta Unifence Table Saw Guide System
- Replaces the Stock Delta Fence which mounts to their saw fence guide.
- You must own the Delta Uni-Fence to use this product ( NOT INCLUDED )
- Simple mounting - slide the stock fence off of your Uni-Fence and slide the Uni-T-Fence on.
- No holes to drill
Kreg KMS7801 Standard Swing Stop
$29.09
$41.89
Amazon.com
Last update was on: May 12, 2024 7:33 pm
- -Quickly and accurately sets the distance between the end of the board and the saw blade
- -Allows for amazing accuracy and repeatability when cutting boards to length
- -Uniquely designed curved face allows stop to swing out of the way when not in use
